Modeling and Control of Transverse and Torsional Vibrations in a Spherical Robotic Manipulator: Theoretical and Experimental Results

[+] Author and Article Information
Liming Chen, Nabil G. Chalhoub

Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202

J. Dyn. Sys., Meas., Control 119(3), 421-430 (Sep 01, 1997) (10 pages) doi:10.1115/1.2801274 History: Received January 09, 1996; Online December 03, 2007


The present work addresses modeling and control issues pertaining to the positioning and orientating of rigid body payloads as they are being manipulated by flexible spherical robotic manipulators. A general approach, to systematically derive the equations of motion of the robotic manipulator, is used herein. The objective of the controller is to yield a desired rigid body response of the arm while damping out the transverse and torsional vibrations of the compliant link. Note that the control objective has to be achieved by solely relying on the existing joint actuators whose band-widths are far below the natural frequencies of the torsional modes. The current work demonstrates that, in spite of the physical limitations of the system, the controller can actively damp out the torsional vibrations by relying on the coupling terms between the torsional vibrations and the remaining degrees of freedom of the arm. Moreover, a gain scheduling procedure is introduced to continuously tune the controller to the natural frequencies of the flexible link whose length is varied by the prismatic joint. The digital simulation results demonstrate the capability of the “rigid and flexible motion controller (RFMC)” in drastically attenuating the transverse and torsional vibrations during point-to-point (PTP) maneuvers of the arm. Furthermore, the gain scheduling procedure is shown to significantly reduce the degradations in the RFMC performance that are brought about by having the flexible link connected to a prismatic joint. A limited experimental work has also been conducted to demonstrate the viability of the proposed approach.

Copyright © 1997 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.





Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In