0
TECHNICAL PAPERS

Integrated Design and PD Control of High-Speed Closed-loop Mechanisms

[+] Author and Article Information
F. X. Wu

Division of Biomedical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada

W. J. Zhang

Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canadae-mail: chris_zhang@engr.usask.ca

Q. Li

School of Mechanical and Production Engineering, Nanyang Technological University, 50 Nanyang Ave., Singapore

P. R. Ouyang

Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9, Canada

J. Dyn. Sys., Meas., Control 124(4), 522-528 (Dec 16, 2002) (7 pages) doi:10.1115/1.1513179 History: Received November 01, 2000; Revised April 01, 2002; Online December 16, 2002
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Craig, J. J., 1989, Introduction to Robotics: Mechanics and Control, 2nd edition, Addison Wesley, Reading, MA.
Murray, R. M., Li, Z., and Sastry, S. S., 1994, A Mathematical Introduction to Robotic Manipulator, CRC Press Inc.
Craig, J. J., 1988, Adaptive Control of Mechanical Manipulator, Addison-Wesley Publishing Co.
Slotine, J. E., and Li, W., 1991, Applied Nonlinear Control, Prentice Hall, Englewood Cliffs, NJ.
Ortega,  R., and Spong,  M. W., 1989, “Adaptive Motion Control of Rigid Robots: A Tutorial,” Automatica, 25(6), pp. 877–888.
Lin,  M. C., and Chen,  J. S., 1996, “Experiment Toward MARC Design for Linkage System,” Mechatronics, 6(6), pp. 933–953.
Ghorbel, F., 1997, “PD Control of Closed-Chain Mechanical Systems: An Experimental Study,” Proc. of 5th IFAC Symp. on Robot Control SYROCO’97, Nantes, France, 1 , pp. 79–84.
Ghorbel, F., 1997, “A Validation Study of PD Control of Closed-Chain Mechanical Systems,” Proc. of IEEE 36th Conf. on Decision and Control, San Diego, pp. 1998–2004.
Gosselin,  C. M., 1996, “Parallel Computational Algorithms for the Kinematics and Dynamics of Planar and Spatial Parallel Manipulators,” ASME J. Dyn. Syst., Meas., Control, 118(1), pp. 22–28.
Asada, H., and Youcef-Toumi, K., 1987, Direct-Drive Robots: Theory and Practice, MIT Press.
Youcef-Toumi,  K., and Kuo,  A. T. Y., 1993, “High-Speed Trajectory Control of a Direct-Drive Manipulator,” IEEE Trans. Rob. Autom., 9(1), pp. 102–108.
Diken,  H., 1997, “Trajectory Control of Mass Balanced Manipulator,” Mech. Mach. Theory, 32(3), pp. 313–322.
Zhang,  W. J., Li,  Q., and Guo,  L. S., 1999, “Integrated Design of Mechanical Structure and Control Algorithm for a Programmable Four-Bar-Linkage,” Mechatronics, 4(4), pp. 345–362.
Zhang, W. J., and Li, Q., 1999, “Design for Control: A New Principle for Technical Systems Development,” 12th Int. Conf. on Engineering Design, Aug., Munich, Germany.
Doughty, S., 1988, Mechanics of Machines, John Wiley & Sons, Inc.
Burton, P., 1979, Kinematics and Dynamics of Planar Machinery, Prentice-Hall, Inc., Englewood Cliffs, NJ.
Tao,  J., and Sadler,  J. P., 1995, “Constant Speed Control of a Motor Driven Mechanism System,” Mech. Mach. Theory, 30(5), pp. 737–748.
Dawson,  D. M., Qu,  Z., Lewis,  F. L., and Dorsey,  J. F., 1990, “Robust Control for the Tracking of Robot Motion,” Int. J. Control, 52(3), pp. 581–595.

Figures

Grahic Jump Location
Structure of a four-bar-link mechanism
Grahic Jump Location
Tracking performance of the four-bar-link mechanism with the PD controller under two cases: (a) Profiles of angular displacement tracking errors, (b) profiles of angular velocity tracking errors, (c) responses of angular velocities, and (d) profiles of torque (dotted line: for case 1, only with CIPE; solid line: for case 2, with both CIPE and PCIGI)

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In