0
TECHNICAL PAPERS

Reducing the Impact of False Alarms in Induction Motor Fault Diagnosis

[+] Author and Article Information
Kyusung Kim, Alexander G. Parlos

Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123

J. Dyn. Sys., Meas., Control 125(1), 80-95 (Mar 10, 2003) (16 pages) doi:10.1115/1.1543550 History: Received April 01, 2001; Revised September 01, 2002; Online March 10, 2003
Copyright © 2003 by ASME
Your Session has timed out. Please sign back in to continue.

References

Tavner, P. J., and Penman, J., 1987, Condition Monitoring of Electrical Machines, Research Studies Press, Letchworth, England.
Vas, P., 1993, Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines. Oxford University Press, Clarendon Press, England.
Vas., P., 1999, Artifical-Intelligence-Based Electrical Machines and Drives—Application of Fuzzy, Neural, Fuzzy-Neural, and Genetic-Algorithm-Based Techniques, Oxford University Press, Clarendon Press, England.
Williamson,  S., and Mirzoian,  K., 1985, “Analysis of Cage Induction Motors With Stator Winding Faults,” IEEE Trans. Power Appar. Syst., PAS-104(7), pp. 1838–1842.
Sottile,  J., and Kohler,  J. L., 1993, “An On-line Method to Detect Incipient Failure of Turn Insulation in Random Wound Motors,” IEEE Trans. on Energy Conversion, 8 (4), pp. 762–768.
Kliman, G. B., Premerlani, W. J., Koegl, R. A., and Hoeweler, D., “A new Approach to On-Line Turn Fault Detection in AC Motors.” Proc. of IEEE-IAS Annual Meeting, October 1996, pp. 687–693.
Sottile, J., Trutt, F. C., and Kohler, J. L., 2000, “Experimental Investigation of On-Line Methods for Incipient Fault Detection.” In Proc. of IEEE-IAS Annual Meeting, October, pp. 2682–2687.
Elkasabgy,  N. M., Eastham,  A. R., and Dawson,  G. E., 1992, “Detection of Broken Bars in the Cage Rotor on an Induction Machine,” IEEE Trans. Ind. Appl., 22(6), pp. 165–171.
Schoen,  R. R., Habetler,  T. G., Kamran,  F., and Bartheld,  R. G., 1995, “Motor Bearing Damage Detection Using Stator Current Monitoring,” IEEE Trans. Ind. Appl., 31(6), pp. 1274–1279.
Fllippetti, F., Franceschini, G., Tassoni, C., and P. Vas, 1996, “AI Techniques in Induction Machines Diagnosis Including the Speed Ripple Effect,” Proc. of IEEE IAS Annual Meeting, pp. 655–662.
Leith, D., and Rankin, D., 1991, “Real Time Expert System for Identifying Rotor Faults and Mechanical Influences in Induction Motor Phase Current,” IEE 5th Int. Conf. Electrical Machines and Drives, 5 , pp. 46–50.
Schoen,  R. R., and Habetler,  T. G., 1995, “Effects of Time-Varying Loads on Rotor Fault Detection in Induction Machines,” IEEE Trans. Ind. Appl., 31(4), pp. 900–906.
Yazici,  B., and Kliman,  G. B., 1999, “An Adaptive Statistical Time-Frequency Method for Detection of Broken Bars and Bearing Faults in Motors Using Stator Current,” IEEE Trans. Ind. Appl., 35(2), pp. 442–452.
Lopez, J. E., and Oliver, K., 1996, “Overview of Wavelet/Neural Network Fault Diagnostic Methods Applied to Rotating Machinery,” Proc. of Joint Conf. of Technology Showcase Integrated Monitoring, Diagnostics and Failure Prevention, pp. 405–417.
Liu,  B. , 1997, “Machinery Diagnosis Based on Wavelet Packets,” J. Vib. Control, 3(1), pp. 5–17.
Yen,  G. G., and Kuo-Chung,  Lin, 2000, “Wavelet Packet Feature Extraction for Vibration Monitoring,” IEEE Trans. Ind. Electron., 47(3), pp. 650–667.
Patton, R. J., and Chen, J., 1992, “Robustness in Quantitative Model-Based Fault Diagnosis,” IEE Colloquium on Intelligent Fault Diagnosis-Part 2: Model-Based Techniques, pp. 1–17.
K.,  Kimand Parlos,  A. G., 2002, “Induction Motor Fault Diagnosis Based on Neuro-Predictors and Wavelet Signal Processing,” IEEE/ASME Trans. on Mechatronics, 7(2), pp. 201–219.
Atiya,  A. F., and Parlos,  A. G., 2000, “New Results on Recurrent Network Training: Unifying the Algorithms and Accelerating Convergence,” IEEE Trans. Neural Netw., 13(7), pp. 765–786.
Parlos, A. G., Bharadwaj, R. M., and Toliyat, H. A., 1999, “Adaptive Neural Networks-Based State Filter for Induction Motor Speed Estimation,” Proc. of 1999 IEEE Industr. Electr. Society, pp. 678–684.
Parlos, A. G., Kim, K., and Bharadwaj, R. M., 2001, “Sensorless Detection of Induction Motor Failures,” Proc. of SDEMPED 2001, pp. 145–151.
Kim, Kyusung, and Parlos, A. G., 2000, “Model-Based Fault Diagnosis of Electromechanical Systems Using Dynamic Recurrent Neural Networks,” Proc. of 7th Mechatronics Forum Int. Conf. on Mechatronics 2000, pp. 241–252.
Parlos, A. G., and Kim, K., 2000, “An Early Warning System for Detecting Incipient Electric Machine Failures,” COMADEM 2000-Condition Monitoring and Domestic Management, pp. 441–450.
Parlos,  A. G., Rais,  O. T., and Atiya,  A. F., 2000, “Multi-Step-Ahead Prediction in Complex Systems Using Dynamic Recurrent Neural Networks,” Neural Networks, 13(7), pp. 765–786.
Parlos,  A. G., Chong,  K. T., and Atiya,  A. F., 1994, “Application of the Recurrent Multilayer Perceptron in Modeling Complex Process Dynamics,” IEEE Trans. Neural Netw., 5, pp. 255–266.
Haykin, S., 1999, Neural Networks: A Comprehensive Foundation, 2nd Edition, Prentice-Hall, Piscataway, NJ.
Rivals,  I., and Personnaz,  L., 2000, “Construction of Confidence Intervals for Neural Networks Based on Least Squares Estimation,” Neural Networks, 13(4–5), pp. 463–484.
Kliman, G. B., and Stein, J., 1992, “Methods of Motor Current Signature Analysis,” Electric Machines and Power Systems, 20 , pp. 463–474.
Boashash, B., 1990, Time-Frequency Signal Analysis. Advances in Spectrum Analysis and Array Processing, S. Haykin (Ed.), Prentice-Hall, Englewood Cliffs, NJ.
Coifman,  R. R., and Wickerhauser,  M. V., 1993, “Entropy-Based Algorithms for Best Basis Selection,” IEEE Trans. Inf. Theory, 38, pp. 713–718.
Strang, G., and Nguyen, T., 1997, Wavelets and Filter Banks, Cambridge Press, Wellesley, MA.
Wickerhauser, M. V., 1994, Adaptive Wavelet Analysis: From Theory to Software, Cambridge Press, Natick, MA.
Kay, S. M., 1998, Fundamentals of Statistical Signal Processing, Vol. II: Detection Theory, Prentice-Hall, Englewood Cliffs, NJ.

Figures

Grahic Jump Location
Signal-based and model-based fault detection and diagnosis systems
Grahic Jump Location
Estimator B tested with broken rotor bars from 597 kW motor; motor current spectra (top), Indicator 2 (bottom)
Grahic Jump Location
Estimators A and B tested with turn-to-turn stator winding shorts from 373 kW motor; negative sequence of the motor currents (top), Indicator 1 (bottom)
Grahic Jump Location
Estimators A and B tested with power supply imbalance for 2.2 kW motor; Indicator 1 for Estimator A (top), Indicator 1 for Estimator B (bottom)
Grahic Jump Location
Estimator B tested with power supply imbalance for 2.2 kW motor; current residual generated by balanced power supply and unbalanced power supply (top), Indicator 2 (bottom)
Grahic Jump Location
Estimator A tested with motor load variation for 2.2 kW motor; Indicator 1 (top), Indicator 2 (bottom)
Grahic Jump Location
Estimator B tested with motor load variation for 2.2 kW motor; Indicator 1 (top), Indicator 2 (bottom)
Grahic Jump Location
Receiver operating characteristics curves for Estimators A and B
Grahic Jump Location
Residual generation process in model-based fault diagnosis
Grahic Jump Location
Multi-step-ahead motor current predictors
Grahic Jump Location
Estimator B tested with deteriorating bearings from 2.2 kW motor; motor current spectra (top), Indicator 2: (bottom)

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In