In this study, we developed a new centrifugal compressor test facility that can produce wet gas conditions (up to 15% liquid mass fraction (LMF)) and analyzed the effect of the wet gas flow on the fluid performance of a centrifugal compressor. As a result, we found that adiabatic efficiency decreased as LMF increased due to an increase in the shaft power. Moreover, we assumed that the liquid film on the inner wall of the impeller was discharged from the trailing edge at a peripheral-speed by the centrifugal force. Then we found that the shaft power increase ratio at a maximum LMF of 15% could be predicted within 3.7% error on the basis of the assumption.
- Fluids Engineering Division
Feasibility Study of Centrifugal Compressor Performance Under Wet Gas Conditions
- Views Icon Views
- Share Icon Share
- Search Site
Kawaguchi, D, Sakamoto, K, & Kobayashi, K. "Feasibility Study of Centrifugal Compressor Performance Under Wet Gas Conditions." Proceedings of the ASME 2017 Fluids Engineering Division Summer Meeting. Volume 1A, Symposia: Keynotes; Advances in Numerical Modeling for Turbomachinery Flow Optimization; Fluid Machinery; Industrial and Environmental Applications of Fluid Mechanics; Pumping Machinery. Waikoloa, Hawaii, USA. July 30–August 3, 2017. V01AT03A018. ASME. https://doi.org/10.1115/FEDSM2017-69255
Download citation file: