Silicone-based tissue-mimicking phantom is widely used as a surrogate of tissue for clinical simulators, allowing clinicians to practice medical procedures and researchers to study the performance of medical devices. This study investigates using the mineral oil in room-temperature vulcanizing silicone to create the desired mechanical properties and needle insertion characteristics of a tissue-mimicking phantom. Silicone samples mixed with 0, 20, 30, and 40 wt. % mineral oil were fabricated for indentation and needle insertion tests and compared to four types of porcine tissues (liver, muscle with the fiber perpendicular or parallel to the needle, and fat). The results demonstrated that the elastic modulus and needle insertion force of the phantom both decrease with an increasing concentration of mineral oil. Use of the mineral oil in silicone could effectively tailor the elastic modulus and needle insertion force to mimic the soft tissue. The silicone mixed with 40 wt. % mineral oil was found to be the best tissue-mimicking phantom and can be utilized for needle-based medical procedures.
Skip Nav Destination
University of Michigan,
e-mail: yancwang@umich.edu
University of Michigan,
e-mail: ljtai@umich.edu
University of Michigan,
e-mail: yhongwei@umich.edu
University of Michigan,
University of Michigan,
Ann Arbor, MI 48109
e-mail: shiha@umich.edu
Article navigation
June 2014
Research-Article
Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation
Yancheng Wang,
University of Michigan,
e-mail: yancwang@umich.edu
Yancheng Wang
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: yancwang@umich.edu
Search for other works by this author on:
Bruce L. Tai,
University of Michigan,
e-mail: ljtai@umich.edu
Bruce L. Tai
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: ljtai@umich.edu
Search for other works by this author on:
Hongwei Yu,
University of Michigan,
e-mail: yhongwei@umich.edu
Hongwei Yu
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: yhongwei@umich.edu
Search for other works by this author on:
Albert J. Shih
University of Michigan,
University of Michigan,
Ann Arbor, MI 48109
e-mail: shiha@umich.edu
Albert J. Shih
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
;Department of Biomedical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: shiha@umich.edu
Search for other works by this author on:
Yancheng Wang
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: yancwang@umich.edu
Bruce L. Tai
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: ljtai@umich.edu
Hongwei Yu
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: yhongwei@umich.edu
Albert J. Shih
Department of Mechanical Engineering
,University of Michigan,
Ann Arbor, MI 48109
;Department of Biomedical Engineering
,University of Michigan,
Ann Arbor, MI 48109
e-mail: shiha@umich.edu
Manuscript received February 27, 2013; final manuscript received January 6, 2014; published online March 7, 2014. Assoc. Editor: Carl A. Nelson.
J. Med. Devices. Jun 2014, 8(2): 021001 (7 pages)
Published Online: March 7, 2014
Article history
Received:
February 27, 2013
Revision Received:
January 6, 2014
Citation
Wang, Y., Tai, B. L., Yu, H., and Shih, A. J. (March 7, 2014). "Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation." ASME. J. Med. Devices. June 2014; 8(2): 021001. https://doi.org/10.1115/1.4026508
Download citation file:
Get Email Alerts
Cited By
Accuracy of an Apparatus for Measuring Glenoid Baseplate Micromotion in Reverse Shoulder Arthroplasty
J. Med. Devices (December 2022)
Three-Dimensional Printing in Combined Cartesian and Curvilinear Coordinates
J. Med. Devices (December 2022)
A Novel Low-Cost Three-Dimensional Printed Brace Design Method for Early Onset Scoliosis
J. Med. Devices (September 2022)
Related Articles
Design of Novel Catheter Insertion Device
J. Med. Devices (June,2008)
Hertz Contact Based Scaling of Puncture Forces for Large Scale Needle Prototypes Using a Gelatinous Tissue Phantom
J. Med. Devices (June,2010)
Advances in Finite Element Simulations of Elastosonography for Breast Lesion Detection
J Biomech Eng (August,2011)
A New Actuation System With Simulated Electrocardiogram Signal for MR Elastography
J. Med. Devices (June,2010)
Related Proceedings Papers
Related Chapters
Experimental results
Ultrasonic Methods for Measurement of Small Motion and Deformation of Biological Tissues for Assessment of Viscoelasticity
Optimization of Extraction Conditions of Shikimic Acid in Pine Needles Based on Artificial Neural Network
International Conference on Advanced Computer Theory and Engineering, 5th (ICACTE 2012)
Internal and Near Nozzle Flow Simulations of Gasoline Multi-Hole Injector (ECN Spray G) with Transient Needle Motion
Proceedings of the 10th International Symposium on Cavitation (CAV2018)