Skip to Main Content

Just Accepted Manuscript

Research Papers February 19, 2020
Thermodynamics model for Stribeck curve and experiments: the role of interfacial interaction
Research Papers February 19, 2020
Effect of temperature on tribological properties of Cu/Ti3AlC2 composites
Research Papers February 19, 2020
DESIGN OF NOVEL GAS FOIL THRUST BEARINGS AND TEST VALIDATION IN HIGH SPEED TEST RIG
Research Papers February 11, 2020
Analytic Calculation and Experimental Study on the Wear of the Slide Guide of Machine Tool Considering Boundary Lubrication
Research Papers February 11, 2020
Journal Bearing Surface Topography Design Based on Transient Lubrication Analysis
Research Papers February 11, 2020
High temperature erosive wear behavior of high velocity oxy-fuel sprayed Cr3C225 (Ni20Cr) coating on (AISI-316) austenitic steel
Research Papers February 11, 2020
Maximizing the lubricant film thickness between a rigid microtextured and a smooth deformable surface in relative motion, using a soft elasto-hydrodynamic lubrication model
Technical Briefs February 10, 2020
On the erosive wear of Epoxy/CF composite in olive oil extraction process
Research Papers January 30, 2020
An optimization design of contact interface material stiffness for improving the uniformity of the contact pressure
Research Papers January 30, 2020
Friction and Lubrication Behaviour of SLMed Hydraulic Spool Valve under Contaminated Conditions
Research Papers January 30, 2020
A dynamic wear model for micro-grooved water lubricated bearings under transient mixed lubrication condition
Research Papers January 27, 2020
Compatibility of Ionic Liquid with Glycerol Monooleate and Molybdenum Dithiocarbamate as Additives in Bio-Based Lubricant
Discussions January 27, 2020
Comments on the percolation threshold of sealing surfaces and Persson’s theory
Closures January 27, 2020
Reply to comments on the percolation threshold of sealing surfaces and Persson’s theory
Research Papers January 17, 2020
Frictional Study of a High-Speed Helical Gear Pair Using Computational and Experimental Thermo-Elastic Analyses
Research Papers January 17, 2020
Mapping raindrop erosion of GFRP composite wind turbine blade materials: perspectives on degradation effects in offshore and acid rain environmental conditions
Research Papers January 17, 2020
Experimental Investigations on the Tribological Performance of Electric Discharge Alloyed Ti-6Al-4V at 200-600°C
Research Papers January 17, 2020
Elevated-Temperature Wear Study of HVOF spray Cr3C2-NiCr Coated Die Steels
Research Papers January 17, 2020
CONTACT ANALYSIS OF A SOFT COATED ASPERITY DURING LOADING-UNLOADING PROCESS IN CONSIDERATION OF STRAIN HARDENING EFFECTS
Technical Briefs January 17, 2020
Erosion model for brittle materials under low speed impacts
Technical Briefs December 2, 2019
Tribological Evaluation of Electrical Resistance of Lubricated Contacts
Research-Article November 20, 2017
Effect of milling time on sliding friction and wear behavior of hot isostatically pressed titanium alloys Ti-6Al-4X(X=V, Nb Fe) for biomedical applications
Close Modal
This Feature Is Available To Subscribers Only

Sign In or Create an Account

Close Modal
Close Modal